Dahongying hy-601 setting calibration
HENGQUASI:2019-11-07 16:11:24

Dahongying hy-601 setting calibration

1. Short circuit the calibration pin of the main board, input the password "8518" after turning on the machine and returning to zero, and press [peeling].

2. The instrument displays "cal" □ "0", press [1] / press [tare].

3. The instrument displays "cal", "number" and "internal code". Press [peel].

4. The instrument displays "cal", "maximum weighing" and "internal code". Press the number key to modify and press [peeling].

5. The instrument displays "cal", "2" and "internal code". Press [peeling].

6. The instrument displays "cal", "5" and "internal code". 5 is the index value. Press the number key to modify, and press [peeling].

7 the instrument displays "cal", "calibration value" and "internal weight". Press the number key to modify, put the weight, and press [peeling].

8 end of calibration: the instrument displays "0.00", "0.00" and "0.00", and enters the weighing state.